<ruby id="savnh"><option id="savnh"><div id="savnh"></div></option></ruby>

    <span id="savnh"><output id="savnh"></output></span>

    <optgroup id="savnh"><li id="savnh"></li></optgroup>
    <track id="savnh"><em id="savnh"></em></track>

  1. <optgroup id="savnh"><em id="savnh"><del id="savnh"></del></em></optgroup>
    <track id="savnh"><em id="savnh"><del id="savnh"></del></em></track>

    <span id="savnh"><output id="savnh"></output></span>
    Lu'An Jietonda New Material Co.,Ltd.

    PRODUCTS

    Curing agents

    Product name Application Processing & Use level Characteristics
    K7101 Epoxy hardener/curing accelerator □ Incorporated into formula before extrusion
    □ As curing agent,e the use level is 2-4phr on epoxy resin
    ■ Excellent flow and low usage
    ■ Used as curing agent, curing @120℃/30min
    ■ Used as accelerator, curing @240℃/30s
    K7104 Epoxy hardener □ Incorporated into formula before extrusion
    □ As sole curative the use level is 3-5phr on epoxy resin
    ■ Curing @ 140℃/15min or 240℃/30s
    ■ Applied for thick film coatings or FBE coatings
    ■ Good mechanical properties
    ■ Good chemical resistance
    K7108 Epoxy hardener □ Incorporated into formula before extrusion
    □ As sole curative the use level is 4-6phr on epoxy resin
    ■ Curing @ 150℃/10min or 240℃/2min
    ■ Applied for thin film decorative coatings or functional epoxy powder coatings
    ■ Good film appearance and mechanical strength
    SA31 Epoxy hardener/curing accelerator □ Incorporated into formula before extrusion
    □ As accelerator, use level is 0.1-0.5% on total formula
    ■ For functional or decorative powder coatings
    ■ Curing @ 140℃/30min
    SA2830 Epoxy hardener □ Incorporated into formula before extrusion
    □ 3.5-4.5phr on epoxy resin
    ■ For functional or decorative powder coatings
    ■ Curing @ 180℃/15min
    SA2831 Epoxy hardener (accelerated DICY) □ Incorporated into formula before extrusion
    □ 4-5phr on epoxy resin
    ■ For functional or decorative powder coatings
    ■ Curing @ 160℃/12min or 200℃/5min
    SA3120 β-HAA hardener □ Incorporated into formula before extrusion
    □ Hydroxyl equivalent value is about 84
    ■ Eco-friendly,Low-toxicity,anti-yellowing
    ■ Exterior application, Substitute of TGIC
    K7150 Blocked polyisocyanate curing agent for PU powder coatings It is recommended to cure with hydroxyl polymer in equivalent amount (13:87 for polyester with hydroxyl value of 30; 20:80 for polyester with hydroxyl value of 50) ? Extremely high crosslink density , excellent surface hardness and chemical resistance for coating . ? Excellent leveling and smoothness. ? Excellent weather resistance.
    K7152 Blocked polyisocyanate curing agent for powder coatings It is recommended to cure with hydroxyl polymer in equivalent amount 13:87 for polyester with hydroxyl value of 30; 20:80 for polyester with hydroxyl value of 50 ? Extremely high crosslink density , excellent surface hardness and chemical resistance for coating . ? Excellent leveling and smoothness. ? Excellent weather resistance and anti yellowing performance.

    CONTACT US

    Contact us

    Order

    HOTLINE:

    +86-564-3711165
    +86-13966241417
     

    Mobile version

    Search

    Add: 15 Li Dun, North Outskirts of Luan City, Anhui, P, R, China  P.C.:237158
    Tel: +86-564-3711165 , +86-564-3711777
    Fax: +86-564-3711167 E-mail: jietonda@jietondachem.com

    Copyright(C)2019, Lu'An Jietonda New Material Co.,Ltd. All Rights Reserved. Supported by ChinaChemNet ChemNet Toocle Copyright Notice 備案序號:皖ICP備11004581號

    久久久久久精品无码_久久久久亚洲Aⅴ无码_少妇人妻综合久久中文字幕_中文亚洲爆乳无码专区